搜索Animating Orientation
2013-06-21 by:廣州有限元分析、培訓中心-1CAE.COM 來源:仿真在線
Animating the Camera View Orientation
You can impose a motion on the assembly through the animation by changing the view orientation of the camera over time. The camera view orientation defines how a model is viewed during animation.
To create a view orientation animation of an assembly:
Enable view orientation in the animation.
Drag the timebar to a new position, past the start time.
Drag the key point from the Orientation and Camera Views line to the time bar, and select Place Key.
Do one of the following:
Rotate, pan, or zoom the model to present the view of interest.
Select a standard view tool from the View toolbar.
Right-click the key point in the line that extents from Orientation and Camera Views , select View Orientation, and select a standard or named view.
Repeat steps 2 through 4 to define the camera view orientation key points for this animation.
When the animation is complete, right-click Orientation and Camera Views and select Disable Playback of View Keys to prevent any further changes in views from being included in the animation.
Click Play from Start (MotionManager toolbar) to test your results.
To disable view orientation in an animation:
Right-click Orientation and Camera Views in the MotionManager design tree and select Disable View Key Creation.
To enable view orientation in an animation:
Right-click Orientation and Camera Views in the MotionManager design tree and select Disable View Key Creation.
To capture a new view key point
Place a key point in the line that threads from Orientation and Camera Views in the MotionManager design tree.
相關標簽搜索：Animating Orientation SolidWorks培訓課程 SolidWorks設計教程 SolidWorks視頻教程 SolidWorks軟件下載 SolidWorks在建筑室內設計工業(yè)設計的應用 SolidWorks基礎知識 SolidWorks代做 Fluent、CFX流體分析 HFSS電磁分析 Ansys培訓 Abaqus培訓 Autoform培訓
